ES1640dc Enterprise ZFS NAS, offering nearly zero-downtime highly reliable services<br> <br> (SAS 6Gb/s)

Typ

NAS

Vikt

26.75 kg

Kylning

Hot-swappable fan module (60*60*38mm; 16000RPM/12v/2.8A x 3)

Kontroller

Intel Xeon E5-2400 v2 family processor Intel Xeon 6-core Processor E5-2420 v2 (15M Cache, 2.20GHz)

Dimensioner

618 (D) 446.2 (W) 132(H) mm (excluding front grips)

Ethernet-portar

13

Värdanslutning

Ethernet

Diskgränssnitt

SAS

Övriga specifikationer

1.

Password & Network Settings Reset Button 9. PCIe Gen2 x4 Slot, with dual path Mini-SAS (SFF-8088) expansion card on board

2.

Hard Drive LED Indicators 4. LED Indicators System Power LED (Blue): on/off System Status (Green/ Red): in operation, system errors, low power, degraded RAID mode, memory failure, fan/power supply failure, system/disk temperature too high, storage pool reaching threshold value, system performing take-over, power supply unit unplugged LCD Status Display (Two-digit number): Status of JBOD connection

5.

2 x USB 3.2 Gen 1/2.0 Port 13. Controller Status Light (Green/ Orange)

6.

2 x 10GbE (RJ45) Port 14. Fan Status Light (Green/ Orange)

8.

Reserved Mini-SAS Port (SFF-8088) 16. High Availability LED (Green/ Orange)

USB

2 x USB 3.2 Gen 1/2.0 port (For Developement and debug only)

EJ1600

16-bay SAS 6Gbps RAID expansion enclosure The connection between Enterprise ZFS NAS and EJ series JBOD requires 2 additional Mini SAS cables for creating a redundant cross loop configuration.

Memory

System memory: DDR3 RDIMM Total memory slots: 6 (Dual controllers; 2 x main memory DIMM and 1 x write cache DIMM for NVRAM for each controller.) 32GB for main memory DIMM and 16GB write cache DIMM per controller.

ES1640dc

Ethernet cable (10GbE) x 4 Ethernet cable (1GbE) x 2

PCIe Slot

PCIe Slot x8 (Gen2 x8): reserved for 40GbE or 10GbE LAN card PCIe Slot x4 (Gen2 x4): reserved for dual path Mini-SAS

Hard Drive

16 x 3.5"/2.5" SAS 6Gbps hard drive (compatible with SAS 12Gbps hard drive), or 2.5" SAS SSD

Form Factor

3U rackmount

Sound Level

Sound pressure (LpAm) (bystander position): 66.1dB

Flash Memory

2 GB DOM

Power Supply

770 W (Redundancy for fault tolerance)

CAB-SAS05M-8088

Mini SAS external cable (SFF-8088 to SFF-8088), 0.5M The connection between Enterprise ZFS NAS and EJ series JBOD requires 2 additional Mini SAS cables for creating a redundant cross loop configuration.

CAB-SAS20M-8088

Mini SAS external cable (SFF-8088 to SFF-8088), 2M The connection between Enterprise ZFS NAS and EJ series JBOD requires 2 additional Mini SAS cables for creating a redundant cross loop configuration.

CAB-SAS30M-8088

Mini SAS external cable (SFF-8088 to SFF-8088), 3M The connection between Enterprise ZFS NAS and EJ series JBOD requires 2 additional Mini SAS cables for creating a redundant cross loop configuration.

SAFETY Standard

• EN60950 • BSMI • VCCI • CB • LVD

Power Consumption

Sleep mode: 314.86 W In operation: 501.40 W

CAB-DAC15M-SFPP-A02

10G SFP+ DAC 1.5M Ethernet cable

Hard Drive Interface

SAS 6Gb/s

CAB-DAC30M-SFPP-DEC01

SFP+ Direct attach cable 3m

CAB-DAC50M-SFPP-DEC01

SFP+ Direct attach cable 5m

Maximized Raw Capacity

128TB (Configuration: 16 x 8TB hard drives)

Cache for Copy To Flash (C2F)

mSATA SSD (32GB) dedicated to NVRAM, SATA signaling

Electro-Magnetic Compatibility (EMC)

• FCC Class A (USA only) • CE Mark ( EN55022 Class A, EN55024)

10M-8088.html" target="_blank">CAB-SAS 10M-8088

Mini SAS external cable (SFF-8088 to SFF-8088), 1M The connection between Enterprise ZFS NAS and EJ series JBOD requires 2 additional Mini SAS cables for creating a redundant cross loop configuration.

TCP/IP (IPv4 & IPv6) 10 Gigabit NICs with jumbo frame (LACP, Load Balance, Failover, Round Robin) Service binding based on network interfaces Proxy client DHCP client Protocols: CIFS/SMB2/SMB3, NFS v3/NFS v4, FTP, FTPS, TFTP, HTTP, HTTPS, SSH, iSCSI, SNMP, SMTP, and SMSC Bonjour Discovery

Yes

Active-Active/Active-Standby dual controller for NAS Active-Active dual controller for JBOD expander Automatically hardware error detection and failover Automatically failback when hardware recovered Data port network failover Management port network failover Near zero downtime high availability Dual SAS link loop MPIO and ALUA for iSCSI high availability Link aggregation for network high availability Support SMB3 Continuous Availability (CA)

Yes

Multi-window, multi-tasking based system management Movable Icons and personalized desktop Smart toolbar and dashboard for neat system status display Smart fan Control SNMP (v2 & v3) Resource monitor Network recycle bin for file deletion via CIFS/SMB and File Station Automatic Cleanup File Type Filter Comprehensive logs (events & connection) Syslog client System settings backup and restore Restore to factory default Command Line Interface (CLI)

Yes